日本油研流量控制閥，EDG-01V-B-1-PNT15-51

dirty oil and therefore reduces filtration costs.
實現了滯環小于0.1 %的高精度,
/rev 8.0 16.0 35.0 45.0 63.0 95.0 125.0
額定壓力 MPa 31.5
zui高工作壓力 MPa 35.0
轉速范圍 zui高 3600 2700 2500 2300 2100 1800 1800
r/min zui低 600
吸入壓力 600～1800r/min：-16.
7kPa～50kPa、出1800r/min 時：0kPa～50kPa 表壓力
(03EH type is required the condition Port-Pressure)
Permissible Back Pres. 21 MPa
Rated Flow (@⊿P=1MPa) 10, 20, 35 L/min 40, 80 L/min
Hysterisis 0.1 % or less
Repeatability 0.1 % or less
Step Response (0→100％V)
(Typical) (1) (100→0％V)
16 ms 23 ms
Frequency Response Phase : -90°
（±25%Amplitude）
(Typical) (1) Gain : -3dB
80 Hz 50 Hz
Coil Resistence (20℃) 3 Ω 2 Ω
Current Consumption 2 A (Impulse
load 3 A) 2.5 A (Impulse load 3 A)
從而可大幅度提高母機的再現性。
Max Oeprating Pressure 35 MPa

日本油研流量控制閥，EDG-01V-B-1-PNT15-51